Private Distilleries

"CopperGarden®" Arabia 2L table-top still, with burner and steam-distilling sieve tray & thermometer

This versatile compact copper pot still, ideal for hobby distilling, comes with a sieve, suitable for the steam distillation of beverages and essential oils. You can flavour your spirits with spices to obtain composed alcohols such as gin (with juniper), ouzo (anise and caraway ) etc.

An economical table still with an Arabic design. The copper pot and its forged iron support rest on a solid wooden base. It is delivered complete, with the pot and condenser with spout, an steam sieve, a small copper cup to receive the distillate.

This Arabia Alembic still is appropriate for beginners.

DESTILLIERMEISTER Hobby-E2
Construction of optimized distilleries for over 10 years A registration-free hobby still made of stainless steel. With this beautiful distillery you can make hydrolates, essential oils and distilled water. Easy to use: • approx. Pour 1.7 liters of distilled water into the kettle, • put on the drug basket • fill with herbs or drugs, do not compress, • insert gasket as described below, • put on cover 3. and tighten tension locks 1.1, • insert the distillation bridge 4 into the socket 3.1, • Screw the water hoses to the radiator, connect one end (4.4) to a submersible pump (eg aquarium pump), and the other end (4.5) into the cooling water reservoir. • switch on the heat source and collect at 4.6 hydrolate and oil, • Distill for a maximum of 30 minutes at medium to high heat. The distilling pot and all distillate pipelines are made of stainless steel. The socket for the distillation bridge is made of gunmetal.
The DILLILLIERMEISTER Hobby-E2 is easy to handle. It is ready to use in a few simple steps. For heating, place the distillery on an induction plate. For cooling you need a pot, bucket or bowl of cold water - 10 liters should be enough. With a simple, low-power pump (such as aquarium pump), you can direct water from the reservoir to port 4.4. The hot water leaves the cooling above 4.5. They redirect it back to their water container. Since the cooler is amply sized for its task, a small water flow is sufficient for the cooling.
 

NEW! No more silicone seals required

DISTILLERY MASTER E2-3 Supreme Model 2025

Legal and registration-free distiller made of heavy-duty stainless steel for essential oils

This distiller impresses with its particularly solid material quality. With a 3-litre plant chamber, you have a decent volume for hobby use, even for processing larger quantities of plants or drugs. By raising the aroma basket (optional), you can also experiment with smaller quantities, but you should then work with reduced heating power. The steam is generated in a separate boiler under the plant container, so that contact with boiling water is impossible. Best of all, despite the large plant container, the water boiler only has a volume of 2 litres, which means that the DESTILLIERMEISTER E2-3 Supreme Model 2025 is also legal in Germany and Austria and can be sold and operated without notification to customs.
 

Easy handling:

• In the new model, optimised clamping fasteners mean that no seals are required between the 1st and 2nd or 3rd and 4th chambers. Sealing is achieved by metal contact. This means that there are no follow-up costs for this model.
• Fill the water/steam boiler with at least 1.3 litres and no more than 1.7 litres of ideally demineralised or distilled water.
• Attach the 3-litre plant tube and close the boiler with the clamps 1.1.
• Place the aroma basket in the plant tube and open it.
• Fill to the brim with herbs or medicinal plants – do not compress. This is approximately 3 litres.
• Place the lid 3 on top and tighten the fasteners 2.4.
• Insert the distillation bridge 4 into the socket 3.1.
• Insert the thermometer with the plug into the socket 4.2.
• Screw any cooling water hoses that are not included in the accessories to the cooler.
• Switch on the heat source and collect the hydrolate with oil at 4.6.
• Distil for about 8 minutes at high power (induction plate 2000 watts). You should have 500 ml of distillate.

The water/steam container and plant/drug tube, as well as all distillate-carrying pipes and connections, are made of stainless steel.

NEW! No more silicone seals required

DISTILLERY MASTER E2-3 Supreme Model 2025

Legal and registration-free distiller made of heavy-duty stainless steel for essential oils

This distiller impresses with its particularly solid material quality. With a 3-litre plant chamber, you have a decent volume for hobby use, even for processing larger quantities of plants or drugs. By raising the aroma basket (optional), you can also experiment with smaller quantities, but you should then work with reduced heating power. The steam is generated in a separate boiler under the plant container, so that contact with boiling water is impossible. Best of all, despite the large plant container, the water boiler only has a volume of 2 litres, which means that the DESTILLIERMEISTER E2-3 Supreme Model 2025 is also legal in Germany and Austria and can be sold and operated without notification to customs.
 

Easy handling:

• In the new model, optimised clamping fasteners mean that no seals are required between the 1st and 2nd or 3rd and 4th chambers. Sealing is achieved by metal contact. This means that there are no follow-up costs for this model.
• Fill the water/steam boiler with at least 1.3 litres and no more than 1.7 litres of ideally demineralised or distilled water.
• Attach the 3-litre plant tube and close the boiler with the clamps 1.1.
• Place the aroma basket in the plant tube and open it.
• Fill to the brim with herbs or medicinal plants – do not compress. This is approximately 3 litres.
• Place the lid 3 on top and tighten the fasteners 2.4.
• Insert the distillation bridge 4 into the socket 3.1.
• Insert the thermometer with the plug into the socket 4.2.
• Screw any cooling water hoses to the cooler.
• Switch on the heat source and collect the hydrolate with oil at 4.6.
• Distil for about 8 minutes at high power (induction plate 2000 watts). You should have 500 ml of distillate.

The water/steam container and plant/drug tube, as well as all distillate-carrying pipes and connections, are made of stainless steel.

DESTILLIERMEISTER E2-4 Supreme

New 2020 model with reduced overall height and longer cooler with reduced water consumption.
Legal, registration-free stainless steel still for essential oils with a full 4 liters of plant space.

20 ml Essenial Oil within 15 Minutes
With over 4 liters of plant space they have plenty of volume to process even larger amounts of plants or drugs. By raising the aroma basket you can also experiment with smaller amounts, but they should then work with reduced heating power. The steam is produced in an extra boiler under the plant container, so that a contact with boiling water can be excluded. The best thing is: Since the kettle is only 2 liters in volume despite the large plant container, the DESTILLIERMEISTER E2-4 Supreme is also legal in Germany and Austria and may be sold and operated without notification.
Simpel handing:

• Pour 1.8 liters of water into the water / steam boiler,
• Place up to 4 liters of plant pipe and close with tension locks,
• Insert aroma basket,
• fill with up to 4 liters of herbs or drugs - do not compress,
• seal as described below
• fit cover 5. and tighten tension locks 4.1,
• insert distillation bridge 6 in socket 5.1,
• screw the coolant hoses to the cooler,
• switch on the heat source and collect oil and Hydrolat at 6.6,
• distill for a maximum of 15 to a maximum of 20 minutes at a higher power (induction plate 2000 watts).

Water / steam tank and plant / drug tube, as well as all distillate leading pipelines are made in high quality stainless steel.

NEW! No more silicone seals required

DESTILLIERMEISTER E2-4 Supreme-Plus

Legal, registration-free still made of stainless steel for essential oils and with a full 4 litres of plant space.

This system differs from the standard E2-4 variant in the following improvements:

• The boiler and the plant tube are not rigidly connected but can be disconnected by means of a 3/4’ V4A screw connection.
• The plug-in socket for the distillation bridge, plugged in tightly, is made of high-quality V4A stainless steel (instead of red brass in the standard version).
• The plant basket is height-adjustable so that smaller quantities can also be distilled.

25ml of essential oil in 8 minutes – that's what we achieved with 400g of lavender flowers.

With 4 litres of plant space, you have plenty of volume to process larger quantities of plants or drugs. The steam is generated in a separate boiler under the plant container, so there is no possibility of coming into contact with boiling water.

And the best thing is: since the water boiler has a volume of only 2 litres despite the large plant container, the DESTILLIERMEISTER E2-4 Supreme-Plus can be sold and operated legally and without reporting to customs in Germany and Austria.

Easy to use:

• In the new model, no seals are required between 1. and 2. as well as 3. and 4. due to optimised clamping locks. Sealing works metallically. Therefore, there are no follow-up costs for this model.
• Fill at least 1.3 litres, not more than 1.7 litres, ideally demineralised or distilled water into the water/steam boiler.
• Put on the 4 litre plant tube and close the boiler with the clamps 1.1.
• Put the aroma basket into the plant tube and open it.
• Fill up to the edge with herbs or drugs - do not compress. There are about 4.2 litres.
• Put on the lid 3. and tighten the clamps 2.4,
• insert the distillation bridge 5 into the socket 4.1,
• screw the cooling water hoses to the condenser.
• Switch on the heat source and collect the hydrosol with oil at 5.6.
• Distil at high power (induction plate 3000 watts) for about 8 minutes. There should be 500 ml of distillate.

The water/vapour tray and plant/drug tube, as well as all distillate-carrying pipes and connections, are made of stainless steel