Search
Current filter
Stainless steel burning protection The safest protection against burning of mash, when distilling, is a water bath still. But with directly heated boilers you must have devices that prevent burning with high security. The first step is to keep the thick components of a mash away from the heated bottom. This is achieved primarily by a mash strainer. But a mash strainer alone is not a 100% burning protection. If the liquid component of a mash still contains starch, the liquid can also burn. To find that out, you should either do an iodine starch test, or cheaper, put a small amount of the liquid mash in a small pot and do a burning test on the stove. If the small amount burns, precautions must be taken. If you know that you do not use 100% ripe fruit, burn is likely. In this case, it is advisable to use an amylase, which converts residual starch into sugar. This not only reduces the danger of burning, but also increases the yield. Nevertheless, you should perform the above-mentioned burning test after fermentation. If the sample still tended to burn despite using an amylase, in addition to the mash sieve for instance a mash bag, as we offer it here in different sizes. This can not only keep solid components off the ground, but also filter out residual yeast. The combination of amylase, mash screen and filter bag or filter cloth should prevent burning. Aroma basket Is not it just protection against burning, but that either, in Germany only for commercial applications, alcohol vapor flows through fruits or herbs to obtain an aromatized distillate, or steam distillations to produce hydrosol and essential oils to be carried out, which is also in Germany is allowed, one uses a height-adjustable aroma sieve. This is placed in a still above the neutral alcohol or water and filled with fruits, flowers or herbs and will be distilled.
Set of Textures Hosepipe for Distillery 2 Hosepipes , 2m long:
1/2" - 3/4" und 1/2" - 1/2"
Two times 2 m long crease resilent PVC-Textures-Hosepipe with fitting screw-connection using between cooler of distillery (1/2") and your home connection.
Set of Textures Hosepipe for Distillery 2 Hosepipes , 3 m long:
Two times 3 m long crease resilent PVC-Textures-Hosepipe with fitting screw-connection using between cooler of distillery (1/2") and your home connection.
Accessory set with pump for miniature copper stills up to 3 litres- Not suitable for our stainless steel stills This set includes everything you need to be able to distil immediately and seriously with our stills up to about 3 litres. The pump is powerful enough to safely supply even all mini nestling in the range 0,5 to 3 litres size (as they may be used legally in Austria and from 2018 Germany or Switzerland) with cooling water. First and foremost, the set contains a functionally-sized cooling system for the still, but there are also other accessories for cleaning and sealing. In addition, when purchasing a stainless steel still together with the accessory set the right hose fittings for our coolers are there. The set includes a 10-liter plastic tub as a cooling water depot (the water must be replaced several times in larger distilleries), plus a 230-volt cooling water pump, plus several meters of food-grade tubing in four different sizes so you can safely connect any distillery. The hoses can be partially inserted into each other and can thus also bridge different connections and adapters. In addition, a cleaning brush, a swim thermometer, a roll of Teflon tape for sealing the still and a 100 ml graduated cylinder to the distillate safely collecting and measuring.
This set includes everything you need to be able to distil immediately and seriously with our stills up to about 20 litres. The pump is powerful enough to safely supply even all mini nestling in the 3 to 10 litres size with cooling water. First and foremost, the set contains a functionally-sized cooling system for the still, but there are also other accessories for cleaning and sealing. In addition, when purchasing a stainless steel still together with the accessory set the right hose fittings for our coolers are there. The set includes a 10-litres plastic tub as a cooling water depot (the water must be replaced several times in larger distilleries), plus a 230-volt cooling water pump, plus several meters of food-grade tubing in four different sizes so you can safely connect any distillery. The hoses can be partially inserted into each other and can thus also bridge different connections and adapters. In addition, a cleaning brush, a swim thermometer, a roll of Teflon tape for sealing the still and a 100 ml graduated cylinder to the distillate safely collecting and measuring.
This set includes everything you need to be able to distil immediately and seriously with our stainless stills up to about 10 liters.
20 liter plastic bucket with lid as a cooling water reservoir.
Powerful 230 volt cooling water pump, sufficient for all our stainless steel stills up to 2 liters.
Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 2 hoses of different thicknesses for different applications.
Plastic tap for cooling water regulation, suitable for the walking flow cooler.
Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.
Cleaning brush.
Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed.
A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.
Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.
Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.
This set includes everything you need to ferment 20 liters of mash or to be able to distil immediately and seriously with our 2 liter stainless steel stills. We would like to point out to our German customers that the fermented mash may not be distilled by private individuals in Germany.
20 liter plastic bucket as mash or cooling water reservoir.
Fermentation attachment for plugging into the lid with a sealed hole.
Outlet tap for mash extraction.
Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed. During fermentation, it can be used to measure the fermentation temperature.
{{.}}
{{{.}}}
