Private Distilleries

DESTILLIERMEISTER FLEXI2-3 - the allrounder
Legal and registration-free 2 liter hobby still made of heavy-duty stainless steel for various applications

The DESTILLIERMEISTER FLEXI2-3 Supreme impresses with its particularly solid material quality.
Private users from Germany can purchase this still legally and without registration. This device may also be used legally for the extraction of essential oils and hydrosols.
In Austria, alcohol can also be legally produced with this still. The DESTILLIERMEISTER FLEXI2-3 Supreme is equally suitable for both applications.
There are variable usage variants for distilling schnapps. In this way, aromatic fruit brandies can be produced or, by increasing the column resistance, they can also be used very well for cleaning alcohol. Because the distillation bridge can be attached to both the still and the column, the still is suitable for pot still and reflux distilling.

Essential oils and hydrolates
With 3 liters of plant space, the FLEXI2-3 Supreme has a decent volume in the hobby area to process larger quantities of plants or drugs. The steam is generated in an extra boiler under the plant container, so that contact with boiling water can be excluded. The best thing is: Since the kettle only has a volume of 2 liters despite the large plant container, the DESTILLIERMEISTER FLEXI2-3 Supreme is also legal in Germany and Austria and can therefore be sold and operated without notification to customs.

Easy to use:

• Pour 1.5 liters into the water / steam boiler,
• Put the seal with the long lip facing inwards over the edge of the boiler,
• Put on cover 2 and close with the latches (1.1).
• Attach 3 liter plant tube (3).
• Insert the aroma basket (8) and fill it with up to 3 liters of herbs or drugs - just compress slightly,
• Put the seal - as described above - over the edge of the plant tube.
• Put on the cover (4) and tension the latches (3.2).
• Insert the distillation bridge 5 into the socket 4.1.
• Screw suitable cooling water hoses to the radiator with 1/2 "hose screw connections, water supply via 5.4, waste water via 5.5.
• Switch on the heat source and at 5.6 collect hydrolates with oil. The distillate line 7 must not be immersed in the distillate.
• With a full tube, distill a maximum of 15 to a maximum of 20 minutes at higher power (e.g. induction plate 1500 to 2000 watts). The heating output must be reduced for smaller quantities.

DESTILLIERMEISTER E2-4 Supreme-Plus- with all the necessary accessories for professional work

You save € 50,- compared to single purchase

Legal, registration-free distillery made of stainless steel for essential oils and with a full 4 litres of plant space.

This system differs from the standard E2-4 variant in the following improvements:

• The boiler and plant tube are not rigidly connected but can be separated using a 3/4" V4A screw connection.
• The plug-in socket for the distilling bridge is made of high-quality V4A stainless steel (instead of gunmetal in the standard version).
• The plant basket is height-adjustable so that smaller quantities can also be distilled.

25 ml of essential oil in 10 minutes - that's what we achieved with 400 g of lavender flowers.

With 4 litres of plant space, you have plenty of volume to process larger quantities of plants or drugs. The vapour is generated in an extra boiler under the plant container, so that contact with boiling water can be ruled out.

The best thing is: As the water boiler only has a volume of 2 litres despite the large plant container, the DESTILLIERMEISTER E2-4 Supreme-Plus can also be sold and operated legally in Germany and Austria without having to be reported to customs.

Simple handling:

• Fill at least 1.3 litres, no more than 1.7 litres, ideally demineralised or distilled water into the water/steam boiler, place the larger seal over the edge of the boiler.
• Attach the 4 litre plant tube and close the boiler with the clamp fasteners 1.1.
• Place the flavour basket in the plant tube and open.
• Fill up to the rim with herbs or drugs - do not compress. There are about 4.2 litres. Place the small seal over the edge.
• Put on the lid 3. and tighten the caps 2.4,
• Insert the distillation bridge 5 into the socket 4.1,
• Screw the cooling water hoses to the radiator.
• Switch on the heat source and collect the hydrolat with oil at 5.6.
• Distil for about 10 minutes at higher power (induction plate 3000 watts). There should be 500 ml of distillate.

Water / vapour container and plant / drug pipe, as well as all distillate-carrying pipes and connections are made of stainless steel.

DESTILLIERMEISTER E2-4 Supreme-Plus24- with all the necessary accessories for professional work

You save € 50,- compared to single purchase

Legal, registration-free still made of stainless steel for essential oils and with a full 4 litres of plant space.

• The boiler and plant tube are no longer rigidly connected, but can be separated using a V4A cup joint.
• The socket for the distilling bridge, with a tight fit, is made of high-quality V4A stainless steel.
• The distilling bridge can be plugged onto either the plant tube or the water/vapour boiler directly.
• The plant basket is height-adjustable, so that smaller quantities can also be distilled.
• 25 ml of essential oil in 8 minutes - that's what we achieved with 400 g of lavender flowers.

With 4 litres of plant space, you have plenty of volume to process larger quantities of plants or drugs. The steam is generated in a separate boiler under the plant container, so that contact with boiling water can be ruled out.
And the best thing is: since the water boiler has a volume of only 2 litres despite the large plant container, the DESTILLIERMEISTER E2-4 Supreme-Plus24 can be sold and operated legally and without reporting to customs in Germany and Austria.

Easy to use:

• In the new model, no seals are required between 1. and 2. as well as 3. and 4. due to optimised clamping locks. Sealing works metallically. Therefore, there are no more follow-up costs for this model.
• Fill at least 1.3 litres, not more than 1.7 litres, ideally demineralised or distilled water into the water/steam boiler.
• Put on the 4 litre plant tube and close the boiler with the clamping locks 1.1.
• Put the aroma basket into the plant tube and open it.
• Fill up to the edge with herbs or drugs - do not compress. There are about 4.2 litres.
• Put on the lid 3 and tighten the locks 2.4,
• insert the distilling bridge 5 into the socket 4.1, or
• Insert the distillation bridge 5 into the socket 2.1. The distillation bridge also fits directly onto the water/vapour boiler of the new DESTILLIERMEISTER E2-4 Supreme Plus 24 model. This is needed, for example, if you want to produce a rose blossom hydrosol. This is generally obtained by water distillation.
• Screw the cooling water hoses onto the cooler.
• Switch on the heat source and collect the oil at 5.6 hydrosol using a filter.
• Distil at high power (induction plate 3000 watts) for about 10 minutes. There should be 500 ml of distillate.

The water/vapour tray and plant/drug tube, as well as all distillate-carrying pipes and connections, are made of stainless steel.