Accessory set with pump for our stailess-steel stills up to 10 litres
Cooling set with pump for our stainless steel distillers up to 20 litres
This set contains everything you need to start serious distillation immediately, even with our unobtrusive 2-litre stainless steel distillers.
Set accessories
- 20 litre plastic tub as cooling water reservoir
- Powerful 230V cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 litres.
- Various 2m PVC hoses, 2 of which have hose fittings for the still cooler:
The first hose goes from the pump to the 1/2‘ connection of the condenser near the distillate outlet at the bottom. The second hose is connected to the 1/2’ connection for the hot waste water at the top of the condenser. The other end with the 3/4‘ connection is led to where the waste water should go, so back into the bucket when pumping. The 3/4’ connection is now new - previously this end remained open. The reason for this innovation is that you can replace the hoses if you have running water nearby. Most house connections have a 3/4’ thread, so you can connect the 2nd hose from the running water supply to the water inlet of the cooler. The 1st hose is then connected to the top of the cooler and the hot waste water now comes out of the black pump screw nipple. The pump is not needed for this cooling variant. So you now have two options for cooling. In addition to these two hoses, there are three hoses of different strengths for various applications.
- Plastic tap for cooling water control, suitable for the counterflow cooler.
- Scaled 100 ml measuring cylinder with foot to safely collect and measure the distillate.
- Cleaning brush.
- Floating thermometer for cooling water control if the hot waste water is allowed to flow back into the bucket. From 40° C, the water should either be cooled with ice or replaced.
- A roll of Teflon tape for sealing, e.g. if a seal fails during distillation.
Product details
- Accessories set for distilling
- A wide range of accessories at a lower price when bought as a set!
- Everything for a proper cooling circuit
- With materials for sealing and cleaning
- Suitable for our stainless steel stills from 2 to 20 litres